It must be used under suitable voltage and the corresponding
socket must be grounded in good condition;
The equipment should be placed in a place with good heat
dissipation and a clean environment.
The device has three gears, namely manual, stop and automatic
Manual: Switch to manual gear after power on, it will work
continuously, if need to stop when working, turn the switch gear to
stop gear stop: the machine stops.
Auto: Switch to auto gear after power on, it will enter the set auto
cleaning mode(Factory is set to stop automatically after 10
minutes), the timing relay can adjust the cleaning time or set up
the cycle cleaning (see the specification for details).
Water inlet on the left, water outlet on the right.
After the cleaning, the inlet pipe shall be taken out of the
cleaning barrel and continue to give water until no remaining
water, and finally power off the device.
Click Here for the Specification Sheet
Specifications
|
Model:
|
1119905
|
|
Voltage:
|
110V
|
|
1111:
|
≥75g/s
|
|
Appreciation pressure:
|
3.3bar
|
|
Dimension:
|
16 1/2"x8 9/16"x6 1/2"
|
|
Power:
|
20W
|
|
Frequency:
|
50/60Hz
|
|
Current:
|
0.22A
|
|
Max Pressure:
|
≥ 4.8bar
|
|
Weight:
|
13.2lbs
|
