It must be used under suitable voltage and the corresponding socket must be grounded in good condition;
The equipment should be placed in a place with good heat dissipation and a clean environment.
The device has three gears, namely manual, stop and automatic
Manual: Switch to manual gear after power on, it will work continuously, if need to stop when working, turn the switch gear to stop gear stop: the machine stops.
Auto: Switch to auto gear after power on, it will enter the set auto cleaning mode(Factory is set to stop automatically after 10 minutes), the timing relay can adjust the cleaning time or set up the cycle cleaning (see the specification for details).
Water inlet on the left, water outlet on the right.
After the cleaning, the inlet pipe shall be taken out of the cleaning barrel and continue to give water until no remaining water, and finally power off the device.
Specifications | ELECTRIC CLEANING DEVICE |
Voltage | 110V |
1111 | ≥75g/s |
Appreciation pressure | ≥3.3bar |
Dimension | 16 1/2''×8 9/16''×6 1/2'' |
Power | 20W |
Frequency | 50/60Hz |
Current | 0.22A |
Max Pressure | ≥4.8bar |
Weight | 13.2lbs |