What you need to dispense from a keg or dispenser! Any beer dispenser or kegerator is powered by a set of draft beer equipment parts that must work in conjunction for a successful cascade of scrumptious beer.  Keep on reading to learn more about it! Draft Beer Faucet.  The draft beer faucet is the tap that your beer is distributed from. They range at different quality levels and with diverse features. Before purchasing one, you should be aware of its performance potential. If you are trying to administer Guinness or other nitrogen-distributed stouts you will need an exclusively European faucet.              All of them sold at KegWorks have standardized North American attachment male threads for connection to standard shanks (1-⅛-18 UNES-2A).              Nevertheless, always remember that any of which draft beer faucet you choose, it ought to be regularly dismantled and cleaned thoroughly for optimal performance. Shank.   This part provides the connection of the beer line to the faucet. It is a chrome-plated brass tube with external threading. It goes through the hole in a draft tower where the faucet screws onto the front end and the beer line attaches to the back end with a hose barb.  A usual North American shank is a ⅞-inch x 14 straight pipe thread which works with every North American faucet. (Exclusive of North America you will need a specialty shank.) Beer Line Beer line is a dense 3/16-inch inner diameter, food-grade plastic tubing that connects the keg coupler to the back of the shank, where the beer runs. Beer line is purchased by the foot or you can opt for a pre-made jumper that comes complete with the hex nut connectors.  Regulator  It permits appropriate pressure of the CO2 needed to dispense the beer. We recommend using a double gauge regulator, for the most efficient dispensing. We also offer secondary regulators that work in accordance with a primary regulator, letting you dispense several beers at variable pressures, as long as it is commanded by the primary regulator. CO2 Tank Our sales include both 5 and 10-pound aluminum CO2 tanks and nitrogen tanks (for Guinness allocation). Our tanks are shipped vacant, but you can get them filled at any local welding supply store, fire extinguisher supply store, or gas dealer with ease and convenience. Each tank is thoroughly inspected and possess all the correct US DOT and Transport Canada credentials. Please note that CO2 tanks and Nitrogen tanks are almost exactly the same. They are both made of aluminum but have varying valves.  Draft Beer Tower This makes it easy to dispense chilled, delicious beer from the top of your kegerator or right from your countertop. Available in a range of styles, accommodating numerous draft beer faucets. All of our fully consolidated tower kits comprise of the faucet head(s) and around three feet of the beer line. You’ll need to gather mounting screws and tap handles.

  It is important to know the ins and outs to the keg coupler in order for it to be maintained: the assembly, the disassembly, regular cleaning and how to solve common problems. Here are some things you should probably know:   What is a keg coupler? A keg coupler is a vital part of the beer draft system as it connects the airline (CO2 or Nitrogen tank to ensure a stable flow, using compressed air to put the liquid into the vessel.) If the keg coupler is not attached stably it will not pour the liquid into the vessel.     Assembly and Disassembly of a Keg Coupler To maintain its quality – it has to be cleaned regularly, meaning to frequently attach and dismantle the utensil.   Here is a look at a completely dismantled keg coupler (aka Economy D Coupler):         Here is another look, but at a premium stainless steel version too, better for your keg coupler:         The parts are as indicated: Check Ball Check Ball Retainer Keg Tap and Tap Lever Handle Probe Seal Body Seal Check valve Tail Piece for 5/16″ Vinyl Hose Hex Nut for Beer Line – ⅜” Bore Stainless Steel Tail Piece for 5/16” Vinyl Hose     NOTE: (IF YOUR KEG COUPLER IS LEAKING, ALWAYS HAVE BEER LINE RUBBER WASHERS)   How to clean a keg coupler?   It is a good idea to clean your keg coupler every 2 or 3 weeks, or every half keg.   Draw out all parts from the coupler and dismantle it. Make a solution of roughly 1/2 oz to 1 oz of cleaning solution for every quart of water. Follow the instructions on the bottle of cleaning solution for precise amounts. Position all keg coupler parts in the solution, and brush them spotless. Wash them with clean water, then towel dry ahead of use.   Never forget to clean your beer lines as well!         Use the same combination of water/cleaning solution. Render your CO2 or Nitrogen, along with your regulator, completely off. Remove your coupler, faucet, beer line, and air line. Pour the cleaning solution into the jar and attach to the beer line. Tighten one end of the beer line to the jar and the other end to a bucket of cleaning solution. Wash down the cleaning solution through the line, and then pump clean water through the line a couple of times to shed all solution. Finally, reattach the parts of your system.   Is your keg tap not sealing, not working at all, or the handle is stuck?   The right-sized coupler should attach relatively easily, it is the wrong one if it doesn’t. Be sure to comprehend and match the beer you’re using with our keg coupler list:   https://talosusa.com/search?q=coupler   What if the coupler is leaking or beer appears foamy?   Be sure that your rubber check valve is attached properly, which is often ignored and then discarded all the while being a critical part. Also, having extra rubber washers helps in the proper attachment of the hex nut and tailpiece to the lines, eliminating leaks when they reinforce attachments elsewhere in your system. Whenever two pieces of metal are colliding in your draft beer system, it’s a good idea to use a rubber washer to fasten them together.   For further queries, please feel free to contact: Give us a call M-F 9:00 AM – 6:00 PM at 626.923.9266, or email us at Support@talos-usa.com

Talos USA Model #22708 Type D Stainless Steel Coupler Compatibility The Talos Type D stainless steel coupler is compatible with all US Sankey Keg Valves. This means it'll work directly with all your favorite domestic beer brands. Durability Our Type D coupler is constructed with 304 stainless steel which not only gives it a nice aesthetic look, but benefits your daily long-term industrial use with its corrosion resistance. Ergonomic Handle You'll notice our keg couplers ergonomic handle is made of premium components to ensure its daily use and abuse. Simple functionality with it's easy open and lock function.